Plastics; plates, sheets, film, foil and strip (not self-adhesive), of plastics n.e.c. in heading no. 3920, non-cellular and not reinforced, laminated, supported or similarly combined with other materials3920.99

Of other plastics

Of other plastics

Of condensation or rearrangement polymerisation products, whether or not chemically modified

Of condensation or rearrangement polymerisation products, whether or not chemically modified

Polyimide foil and strip, uncoated, or coated or covered solely with plastic

Polyimide foil and strip, uncoated, or coated or covered solely with plastic

Polyimide sheet and strip, uncoated, or coated or covered solely with plastic

Polyimide foil and strip, uncoated, or coated or covered solely with plastic

Polyimide sheet and strip, uncoated, or coated or covered solely with plastic

Other

Polyether imide sheets, in rolls, with -|a thickness of 5|µm or more, but not more than 14|µm, -|a width of 478|mm or more, but not more than 532|mm, -|a tensile strength at break of 78|MPa or more (as determined by JIS C-2318|for a film thickness of 50|µm), -|an elongation at break of 50|% or more (as determined by JIS C-2318|for a film thickness of 50|µm), -|a glass transition point (Tg) of 226|°C, -|a continuous service temperature of 180|°C (as determined by UL-746|B for a film thickness of 50|µm), -|a flammability of VTM-0|(as determined by UL 94|for a film thickness of 25|µm)

Polymer film containing the following monomers: -|poly (tetramethylene ether glycol), -|bis (4-isocyanotocyclohexyl) methane, -|1,4-butanediol or 1,3-butanediol, -|with a thickness of 0,25|mm or more but not more than 5,0|mm, -|embossed with a regular pattern on one surface, -|and covered with a release sheet

Transparent polyurethane film metallised on one side: -|with a gloss of more than 90|degrees according to ASTM|D2457 -|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -|covered on the other side with a protective poly(ethylene terephthalate) film -|with a total thickness of more than 204|µm but not more than 244|µm

Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C)

Thermoplastic polyurethane film, of a thickness of 250|μm or more but not more than 350|μm, covered on one side with a removable protective film

Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm

Thermoplastic polyurethane film extruded, with : -|not self-adhesive, -|an index of yellow lower of more than 1,0|but not more than 2,5|for 10|mm stacked films (as determined by test method ASTM|E|313-10), -|a light transmission higher to 87|% for 10|mm stacked films (as determined by test method ASTM|D|1003-11), -|a total thickness of 0,38|mm or more, but not more than 7,6|mm, -|a width of 99|cm or more, but not more than 305|cm, of a kind used in the production of laminated safety glass

Silicone tape, plate or strip: -|of a total thickness of 2|mm or more, but not more than|9|mm, -|of a total width of 12|mm or more, but not more than 65|mm, for use in the manufacture of products of headings 8521|or 8528

Matt, thermoplastic polyurethane foil in rolls with: -|a width of 1640|mm| (± 10|mm), -|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457), -|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287), -|a thickness of more than 365|µm but not more than 760|µm, -|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)), -|an elongation to break of 470|% (as determined by the method: EN|ISO|527)

Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,| -|with a protective layer of poly(ethylene terephthalate) on the other side, and -|with a width of 5|cm or more but not more than 100|cm -|with a length of not more than 2|000|m

Thermoplastic polyurethane foil in rolls with: -|a width of more than 900|mm but not more than 1016|mm, -|a matt finish, -|a thickness of 0,43|mm (± 0.03|mm), -|an elongation to break of 420|% or more but not more than 520|%, -|a tensile strength of 55|N/mm$2$ (± 3) (as determined by the method EN ISO 527) -|a hardness of 90|(± 4) (as determined by the method: Shore A [ASTM D2240]), -|wrinkle inside (waves) of 6,35|mm, -|a flatness of 0,025|mm

Other

Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm

Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm

Of addition polymerisation products

Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells

Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells

Other

For use in certain types of aircraft

Other

Poly(1-chlorotrifluoroethylene) film

Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite

Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019|mm or more but not more than 0,14|mm, impermeable to water vapour

Ion-exchange membranes of fluorinated plastic material

Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|µm or more but not more than 90|µm, a tensile strength at break of 20|MPa or more but not more than 45|MPa and an elongation at break of 250|% or more but not more than 900|%

Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|µm or more but not more than 90|µm, a tensile strength at break of 20|MPa or more but not more than 55|MPa and an elongation at break of 250|% or more but not more than 900|%

Tetrafluoroethylene film, put up in rolls, with: -|a|thickness of 50|µm, -|a|melting point of 260|°C, and -|a|specific gravity of 1,75|(ASTM D792) for use in the manufacture of semiconductor devices

Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: -|a thickness of 0,010|mm or more but not more than 0,80|mm, -|a width of 1|219|mm or more but not more than 1|575|mm, and -|a melting point of 252|°C (measured according ASTM D-3418)

Other

Other

Anisotropic conductive film, in rolls, of a width of 1,2|mm or more but not more than 3,15|mm and a maximum length of 300|m, used for joining electronic components in the production of LCD or plasma displays

Anisotropic conductive film, in rolls, of a width of 1,5|mm or more but not more than 3,15|mm and a maximum length of 300|m, used for joining electronic components in the production of LCD or plasma displays

Other