Plastics; plates, sheets, film, foil and strip (not self-adhesive), of poly(ethylene terephthalate), non-cellular and not reinforced, laminated, supported or similarly combined with other materials3920.62
EU customs codes (CN)
Poly(ethylene terephthalate) film of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks, and poly"ethylene terephthalate" film, not reinforced, of a thickness of >= 100 micrometres but <= 150 micrometres, for the manufacture of photopolymer printing plates
Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of <= 0,35 mm (excl. such self-adhesive products, floor, wall and ceiling coverings of heading 3918, poly"ethylene terephthalate" film of a thickness of >= 100 but <= 150 micrometres for the manufacture of photopolymer printing plates and poly"ethylene terephthalate" film of a thickness of >= 72 but <= 79 micrometres for the manufacture of flexible magnetic disks)
Plates, sheets, film, foil and strip, of non-cellular poly"ethylene terephthalate", not reinforced, laminated, supported or similarly combined with other materials, without support, unworked or not further worked than surface-worked or merely cut into squares or rectangles, of a thickness of > 0,35 mm (excl. such self-adhesive products, and floor, wall and ceiling coverings of heading 3918)
Turkey — national tariff (GTİP)
- - - - Poli(etilen teraftalat) film (esnek manyetik disklerin imali için kalınlığı
- - - - Diğerleri
- - - Kalınlığı 0,35 mm.yi geçenler
TARIC sub-codes
Of poly(ethylene terephthalate)
Of poly(ethylene terephthalate)
Of a thickness not exceeding 0,35|mm
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates
Other
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50|µm or more but not more than 350|µm, consisting especially of a layer containing carbon black
Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side
Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers
Film of poly(ethylene terephthalate) of a thickness of 186|µm or more but not more than 191|µm coated on one side with an acrylic layer in a matrix pattern
Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
Non-transparent poly(ethylene terephthalate) film: -covered on one side with a layer of a fluoropolymer, -covered on the other side with an adhesive and a layer of polyvinylidene difluoride, -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm
Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 80 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm
Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257-99|method)
Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
Iridescent film of polyester and poly(methyl methacrylate)
Transparent poly(ethylene terephthalate) film: -|coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7|nm or more but not more than 80|nm, -|with a surface tension of 36|Dyne/cm or more but not more than 39|Dyne/cm, -|with a light transmission of more than 93|%, -|with a haze value of not more than 1,3|%, -|with a total thickness of 10|µm or more but not more than 350|µm, -|with a width of 800|mm or more but not more than|1|600|mm
Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
Poly(ethyleneterephthalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of: -|a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2|µm, or -|a silica layer which is deposited through vapour deposition and of a thickness of not more than 1|µm
Poly(ethylene terephthalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2|µm
Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
Other
Of a thickness exceeding 0,35|mm
Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm
Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
Other
Statistical classifications
....of polycarbonates, alkyd resins, polyallyl esters or other polyesters.
Plates, sheets, film, foil and strip, of plastics, not self-adhesive, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Export control
Not correlated with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .