Plastics; plates, sheets, film, foil and strip (not self-adhesive), of polymers of ethylene, non-cellular and not reinforced, laminated, supported or similarly combined with other materials3920.10
EU customs codes (CN)
Non-cellular polyethylene film of a thickness of >= 20 micrometres but <= 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Stretch film of non-cellular polyethylene, not printed, of a thickness of <= 0,125 mm and of a specific gravity of < 0,94
Plates, sheets, film, foil and strip, of non-cellular polyethylene, printed, not reinforced, laminated, supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, of a thickness of <= 0,125 mm and of a specific gravity of < 0,94, n.e.s. (excl. not printed stretch film, and polyethylene film of a thickness of >= 20 but <= 40 micrometres for the production of photoresist film used in the manufacture of semiconductors or printed circuits)
Plates, sheets, film, foil and strip, of non-cellular polythene, not reinforced, laminated, supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, of a thickness of <= 0,125 mm and of a specific gravity of >= 0,94, n.e.s.
Plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, of a thickness of <= 0,125 mm (other than self-adhesive, and wall and ceiling coverings of heading 3918)
Synthetic paper pulp in the form of moist sheets made from unconnected finely branched non-cellular polyethylene fibrils, whether or not blended with cellulose fibres in a quantity <= 15%, containing poly(vinyl alcohol) dissolved in water as the moistening agent, with a thickness of > 0,125 mm
Plates, sheets, film, foil, tape, strip, of unexpanded polymers of ethylene, not reinforced and non-cellular "laminated" or supported or similarly combined with other materials, unworked or not further worked than surface-worked or only cut to square or rectangular shapes, with a thickness of > 0,125 mm (other than self-adhesive and floor, wall and ceiling coverings of heading 3918, and synthetic paper pulp in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity >= 15%, containing poly"vinyl alcohol" dissolved in water as the moistening agent)
Turkey — national tariff (GTİP)
- - - - - Polietilen film (yarı iletkenlerin veya baskı devrelerin imalinde
- - - - - Baskılı olmayan Streç film (strech film)
- - - - - Diğerleri
- - - - Özgül kütlesi 0,94 veya fazla olanlar
- - - Diğerleri
- - - Sentetik kağıt hamuru [Rutubet sağlayıcı madde olarak suda çözün-
- - - Diğerleri
TARIC sub-codes
Of polymers of ethylene
Of a thickness not exceeding 0,125|mm
Of polyethylene having a specific gravity of
Of polyethylene having a specific gravity of
Of polyethylene having a specific gravity of
Of polyethylene having a specific gravity of
Of polyethylene having a specific gravity of
Less than 0,94
Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Stretch film, not printed
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Film of a thickness of not more than 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber
Other
Other
Film of polyethylene, of a kind used for typewriter ribbon
Other
Mono-layered High-Density Polyethylene film: -containing by weight 99 % or more of polyethylene, -with a thickness of 12 μm or more but not more than 20 μm, -with a length of 4000 m or more but not more than 7000 m, -with a width of 600 mm or more but not more than 900 mm
Other
0,94|or more
For use in certain types of aircraft
Other
A Separator film of polyethylene: -coated on one side with a layer of aluminium oxide, -containing by weight not more than 70 % of polyethylene, -containing by weight not more than 30 % of aluminum oxide, -with a total thickness of 5 µm or more but not more than 25 µm, for use in the manufacture of lithium-ion batteries
Other
Printed embossed|film -|of polymers of ethylene -|having a|gravity of 0,94g/cm3|or more -|of a thickness of 0,019mm ±| 0,003mm -|with permanent graphics consisting of two different alternating designs whose individual length is 525|mm or more
Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: -|is repetitive and equally spaced along the length of the film -|is equally and visibly aligned when viewed from the back or front of the film
Other
Other
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Other
Other
For use in certain types of aircraft
Other
Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Tubular layered film predominately of polyethylene: -|consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on| either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, -|having a total thickness of 55|µm or more, -|having a diameter of 500|mm or more but not more than 600|mm
Other
Other
Of a thickness exceeding 0,125|mm
Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent
Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent
Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent
Other
For use in certain types of aircraft
Other
Film of a thickness of not more than 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
Other
Ethylene vinyl acetate (EVA) film with: -|a raised relief surface with embossed undulations, and -|a thickness of more than 0,125|mm
Other
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm
Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Ethylene vinyl acetate (EVA) film: - with a raised relief surface with embossed undulations, - not laminated, - not cross-linked, and - with a thickness of more than 0,3 mm
Other
Statistical classifications
....of polymers of ethylene
Plates, sheets, film, foil and strip, of plastics, not self-adhesive, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Export control
Not correlated with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .