Plastics; of polymers of propylene, plates, sheets, film, foil and strip (not self-adhesive), non-cellular and not reinforced, laminated, supported or similarly combined with other materials3920.20
EU customs codes (CN)
Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, biaxially oriented (excl. self-adhesive and wall or ceiling coverings of chapter No 3918)
Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, not biaxially oriented
Plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of > 0,10 mm, n.e.s.
Turkey — national tariff (GTİP)
- - - - Baskılı olanlar
- - - - Diğerleri
- - - Diğerleri
- - Kalınlığı 0,10 mm.yi geçenler
TARIC sub-codes
Of polymers of propylene
Of a thickness not exceeding 0,10|mm
Biaxially oriented
For use in certain types of aircraft
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5|µm or more but not more than 13,5|µm
Sheets of biaxially - oriented polypropylene|film: -|with the thickness of not more than 0,1|mm, -|printed on both sides with specialised coatings to allow banknote security printing
Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron
Other
Other
For use in certain types of aircraft
Other
Sheet of polypropylene in the form of a roll: -|with a thickness of not more than 30|μm, -|of a width of not more than 210|mm, -|conforming to ASTM|D882,for use in the manufacture of separators for lithium-ion electric vehicle batteries
Other
Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Other
Mono-axial oriented film, of a total thickness of not more than 75µm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: -|a tensile strength in the machine direction of 120|MPa or more but not more than 270|MPa and -|a tensile strength in the transverse direction of 10|MPa or more but not more than 40|MPa as determined by test method ASTM D882/ISO 527-3
Other
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: -|a thickness of 55|µm or more but not more than 97|µm, -|a tensile modulus in the machine direction of 0,30|GPa or more but not more than 1,45|GPa, and -|a tensile modulus in the transverse direction of 0,20|GPa or more but not more than 0,70|GPa
Mono-axial oriented film, of a total thickness of not more than 75|µm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: -|a tensile strength in the machine direction of 140|MPa or more but not more than 270|MPa and -|a tensile strength in the transverse direction of 20|MPa or more but not more than 40|MPa as determined by test method ASTM D882/ISO 527-3
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having: -|a thickness of 55|µm or more but not|more than|97|µm, -|a tensile modulus in the machine direction of 0,75|GPa or more but not|more than|1,45|GPa, and -|a tensile modulus in the transverse direction of 0,20|GPa or more but not|more than|0,55|GPa
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having: -|a thickness of 55|µm or more but not|more than|97|µm, -|a tensile modulus in the machine direction of 0,75|GPa or more but not|more than|1,45|GPa, and -|a tensile modulus in the transverse direction of 0,20|GPa or more but not|more than|0,55|GPa
Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10 % by weight of other polymers, -whether or not containing titanium dioxide in the core layer, -of an overall thickness of not more than 75 μm
Co-extruded trilayer film, • each layer containing a mixture of polypropylene and polyethylene, • containing not more than 3% by weight of other polymers, • whether or not containing titanium dioxide in the core layer, • of an overall thickness of not more than 70 µm
Other
Of a thickness exceeding 0,10|mm
For use in certain types of aircraft
Other
Laminated sheet or strip, consisting of a film of a thickness of 181|µm or more but not more than 223|µm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester
Other
Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Polypropylene sheet, put up in rolls, with: -|flame retardant level of UL 94|V-0|for material thicknesses of 0,25|mm or more and level UL 94|VTM-0|for material thicknesses of 0,05|mm or more but not more than 0,25|mm (as determined by Flammability Standard UL-94) -|dielectric breakdown of 13,1|kV or more but not more than 60,0|kV(as determined by ASTM D149) -|tensile yield in a machine direction of 30|MPa or more but not more than 33|MPa (as determined by ASTM D882) -|tensile yield in a transverse direction of 22|MPa or more but not more than 25|MPa (as determined by ASTM D882) -|density range of 0,988|g/cm$3|or more but not more than 1,035|g/cm$3|(as determined by ASTM D792) -|moisture absorption of 0,01|% or more but not more than 0,06|% (as determined by ASTM D570) for use in the manufacture of insulators used in the electronics and electrical industries
Other
Statistical classifications
....of polymers of propylene
Plates, sheets, film, foil and strip, of plastics, not self-adhesive, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Export control
Not correlated with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .