Electric motors; of an output not exceeding 37.5W8501.10
EU customs codes (CN)
Synchronous motors of an output <= 18 W
Universal AC-DC motors of an output <= 37,5 W
AC motors of an output <= 37,5 W (excl. synchronous motors of an output <= 18 W)
DC motors of an output <= 37,5 W
Turkey — national tariff (GTİP)
- - Çıkış gücü 18 W.ı geçmeyen senkron motorlar
- - - Üniversal alternatif akım/doğru akım (AC/DC) motorları
- - - Alternatif akım (AC) motorları
- - - Doğru akım (DC) motorları
TARIC sub-codes
Motors of an output not exceeding 37,5|W
Motors of an output not exceeding 37,5|W
Synchronous motors of an output not exceeding 18|W
Synchronous motors of an output not exceeding 18|W
For use in certain types of aircraft
Synchronous motor for a dishwasher with a water flow control mechanism with -|a length without axle of 24|mm (+/- 0,3), -|a diameter of 49,3|mm (+/- 0,3) -|a rated voltage of 220|V AC or more but not more than 240|V AC, -|a rated frequency of 50|Hz or more but not more than 60|Hz, -|an input power of not more than 4|W, -|a rotation speed of 4rpm or more but not more than 4,8rpm, -|an output torque of not more than 10kgf/cm
Synchronous motor for a dishwasher with a water flow control mechanism with -|a length without axle of 24|mm (+/- 0,3), -|a diameter of 49,3|mm (+/- 0,3) -|a rated voltage of 220|V AC or more but not more than 240|V AC, -|a rated frequency of 50|Hz or more but not more than 60|Hz, -|an input power of not more than 4|W, -|a rotation speed of 4rpm or more but not more than 4,8rpm, -|an output torque of not less than 10kgf/cm
Motors for air pumps, with: -operating voltage of 9 VDC or more but not more than 24 VDC, -operating temperature range of -40°C or more but not more than 80°C, -an output not exceeding 18 W for use in the manufacture of pneumatic support and ventilation systems for car seats
Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
Electric controller for blinds of cooler, with an operating DC voltage of 9 V or more but not more than 16 V and a maximum power of less than 18 W, containing at least: -a printed circuit board, -an electric stepper motor, -a connector, -a plastic cover, for use in the manufacture of goods of Chapter 87
Other
Other
Other
Other
Universal AC/DC motors
For use in certain types of aircraft
Other
AC motors
For use in certain types of aircraft
Single phased 50|Hz, AC motor driven by permanent single capacitor and having a power output of less than 37|W, for use in the manufacture of indoor split air conditioning units
Other
DC motors
For use in certain types of aircraft
Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
Other
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
Electric (DC) motor powering height adjusting with: -a rated output mechanical power not exceeding 35 W, -frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, -a stall torque of 45 Nm and ultimate torque of 200 Nm, -a maximum current of 15 A, -no load speed of 7 RPM or more but not more than 10 RPM, -a rotation speed of 4 000 RPM or more but not more than 5 600 RPM, -a maximum noise level of 42 dB(A), -a maximum angular backlash up to 3 degrees, and -a 8 tooth pinion module, for use in the manufacture of automotive components for car's seats
DC motor, brushless, with an external diameter of not more than 25,4|mm, a rated speed of 2|260|(±15|%) rpm or 5|420|(±15|%) rpm, a supply voltage of 1,5|V or 3|V
Other
Electric turbocharger |actuator, with: -|a DC motor with an output of 10W or more but not more than |15W, -|an integrated gear mechanism, -|a (pulling)force of |250N or more at 160°C elevated ambient temperature, -|a (pulling) force of 250N or more in each position of its stroke, -|an effective stroke of 15mm or more but not more than 20|mm, -|with or without an on-board diagnostics interface
Other
DC Motor : -|with a speed rotation of not more than 7000|rpm (without load), -|with a nominal voltage of 12|V (± 4|V), -|with a maximum power of 13,78|W (|at 3,09|A), -|with a specified temperature range from -40°C to 160°C, -|with a gear connection, -|with a mechanical attachment interface, -|with 2|electrical connections, -|with a maximum torque of 100|Nm
DC Motor: - with a speed rotation of not more than 7 000 rpm without load, - with a nominal voltage of not more than 18 V, - with a maximum power of 24 W, - for a specific temperature range from -40°C to 160°C, - with or without a gear connection, - with or without a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 100 Nm
DC motor: -|with a rotor speed of not more than 6|500|rpm when not loaded; -|with a rated voltage of 12,0|V (+/- 0,1); -|of a specified temperature range of |- 40|°C or more, but not more than + 165|°C; -|with or without a connecting pinion; -|with or without an engine connector
DC Motor : -|with a speed rotation of not more than|6500|rpm (without load), -|with a nominal| voltage of 12|V (± 4|V), -|with a maximal power below than 20|W, -|with a specified temperature range from -40°C to 160°C, -|with a worm gear drive, -|with a mechanical attachment interface, -|with 2|electrical connections, -|with a maximum torque of 75|Nm
DC motor -|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded -|with a power supply voltage of 100|V or more but not more than 240|V for use in the manufacture of electric fryers
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/- 0,1), -of a specified temperature range of - 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
Electric turbocharger actuator, with: -|a DC motor, -|an integrated gear mechanism, -|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature, -|a (pulling) force of 250|N or more in each position of its stroke, -|an effective stroke of 15|mm or more but not more than 25|mm, -|with or without an on-board diagnostics interface
DC stepping motor, with -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector
DC stepping motor, with -|an angle of step of 7,5|° (± 0,5|°) -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector
Permanently excited DC motor with -|a multiple-phase winding -|an external diameter of 28|mm or more but not more than 35|mm, -|a rated speed of not more than 12|000|rpm, -|a power supply voltage of 8|V or more but not more than 27|V
Permanently excited DC motor with - a multiple-phase winding, - an external diameter of 24 mm or more but not more than 38 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V, - with or without a pulley, - with or without a gear wheel
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20°C to + 70°C
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C
DC stepping motor,|with: -|an angle of step of 7,5° (± 0,5°), -|a pull-out torque at 25|°C of 25|mNm or more, -|a pull-out pulse rate of 1|500|pps or more, -|a two-phase winding, and -|a rated voltage of 10,5|V or more, but not more than 16,0|V
DC stepping motor,|with: -|an angle of step of 7,5° (± 0,5°), -|a pull-out torque at 25|°C of 25|mNm or more, -|a pull-out pulse rate of 1|960|pps or more, -|a two-phase winding, and -|a rated voltage of 10,5|V or more, but not more than 16,0|V
DC stepping motor, with an angle of step of 18|° or more, a holding torque of 0,5|mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22|mm|!x!|68|mm, a two phase winding and an output of not more than 5|W
DC motor, brushless, with an external diameter of not more than 29|mm, a rated speed of 1|500|(±15|%) rpm or 6|800|(±15|%) rpm, a supply voltage of 2|V or 8|V
DC motor, brushless, with an external diameter of not more than 29|mm, a rated speed of 1|500|(±15|%) rpm or 6|800|(±15|%) rpm, a supply voltage of 2|V or 8|V
Other
Statistical classifications
Electric motors of an output not exceeding 37.5 W
Motors of an output not exceeding 37.5 W; other DC motors; DC generators other than photovoltaic generators
Export control
Not correlated with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .