Pulleys and flywheels, including pulley blocks8483.50
EU customs codes (CN)
Flywheels and pulleys, incl. pulley blocks, of cast iron or cast steel
Flywheels and pulleys, incl. pulley blocks (excl. of cast iron or cast steel)
Turkey — national tariff (GTİP)
- - - Volanlar
- - - Kasnaklar
- - - Volanlar
- - - Kasnaklar
TARIC sub-codes
Flywheels and pulleys, including pulley blocks
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Pulley blocks of non-cast steel: -made of structural carbon steel complying with standard JIS G4051, -with an external diameter of 114 mm or more but not more than 118 mm, -with an internal diameter of 33 mm or more but not more than 37 mm, -with a width of 29 mm or more but not more than 33 mm, -with a weight of 0,6 kg or more but not more than 0,9 kg, -with 6 trapezoidal grooves
Pulley blocks of non-cast steel: - made of structural carbon steel complying with standard JIS G4051, - with an external diameter of 104mm or more but not more than 142mm, - with an internal diameter of 33mm or more but not more than 37mm, - with a width of 22mm or more but not more than 40mm, - with a weight of 0,4kg or more but not more than 1,6kg, - with 6 trapezoidal grooves
Pulley blocks of non-cast steel: - made of structural carbon steel complying with standard JIS G4051, - with an external diameter of 104mm or more but not more than 142mm, - with an internal diameter of 33mm or more but not more than 37mm, - with a width of 22mm or more but not more than 40mm, - with a weight of 0,4kg or more but not more than 1,6kg, - with 6 trapezoidal grooves
Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine: -with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm, -with a spring made of a steel alloy containing chromium and silicon, -with two arms made of aluminum, -with a holder made of aluminum, for use in the manufacture of motor vehicle engines
Flywheel designed for damping torsional vibrations and oscillations within a vehicle drivetrain with: -a total moment of inertia of 0.082 kg⋅m², -a weight of 7 kg or more, but not more than 8 kg, -a diameter of 250 mm or more, but not more than 280 mm, for use in the manufacture of motor vehicles
Other
Statistical classifications
Flywheels and pulleys (including pulley blocks)
Transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws, gear boxes and other speed changers; flywheels and pulleys; clutches and shaft couplings; articulated link chain
Export control
Not correlated with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .