Transmission shafts (including cam shafts and crank shafts) and cranks8483.10
EU customs codes (CN)
Cranks and crank shafts, of cast iron or cast steel
Cranks and crank shafts, of open-die forged steel
Cranks and crank shafts (excl. of open-die forged steel or cast iron or cast steel)
Articulated shafts
Main shafts or driving shafts, counter shafts, cam shafts, eccentric shafts and other transmission shafts (excl. cranks, crank shafts and articulated shafts)
Turkey — national tariff (GTİP)
- - - - Sivil hava taşıtlarında kullanılmaya mahsus olanlar
- - - - Diğerleri
- - - - Sivil hava taşıtlarında kullanılmaya mahsus olanlar
- - - - Diğerleri
- - - - Sivil hava taşıtlarında kullanılmaya mahsus olanlar
- - - - Diğerleri
- - - Sivil hava taşıtlarında kullanılmaya mahsus olanlar
- - - Diğerleri
- - - Sivil hava taşıtlarında kullanılmaya mahsus olanlar
- - - - Kam milleri
- - - - - Metal dökümden olanlar
- - - - - Diğerleri
TARIC sub-codes
Transmission shafts (including cam shafts and crank shafts) and cranks
Transmission shafts (including cam shafts and crank shafts) and cranks
Transmission shafts (including cam shafts and crank shafts) and cranks
Cranks and crank shafts
Cranks and crank shafts
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
For use in civil aircraft
Other
Of open-die forged steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Articulated shafts
Articulated shafts
For use in civil aircraft
Other
Other
For use in civil aircraft
Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC
Stepped shaft made of carbon steel with: -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg
Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: -a length of 137,8 mm or more but not more than 138,2 mm, -an outer diameter of 23 mm or more but not more than 48,025 mm, -a weight of 1,0245 kg or more but not more than 1,0445 kg, -a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, -a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm
Other
Statistical classifications
Transmission shafts (including camshafts and crankshafts) and cranks
Transmission shafts and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws, gear boxes and other speed changers; flywheels and pulleys; clutches and shaft couplings; articulated link chain
Export control
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .