Insulated electric conductors; for a voltage not exceeding 1000 volts, fitted with connectors8544.42
EU customs codes (CN)
Electric conductors of a kind used for telecommunications, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s.
Electric conductors, for a voltage <= 1.000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications)
Turkey — national tariff (GTİP)
- - - Telekomünikasyonda kullanılan türde olanlar
- - - - Güneş (solar) panelleri için bağlantı kutuları (junction box)
- - - - Diğerleri
TARIC sub-codes
Fitted with connectors
Fitted with connectors
Fitted with connectors
Fitted with connectors
Other electric conductors, for a voltage not exceeding 1|000|V
Other electric conductors, for a voltage not exceeding 1|000|V
Other electric conductors, for a voltage not exceeding 1|000|V
Other electric conductors, for a voltage not exceeding 1|000|V
Of a kind used for telecommunications
Of a kind used for telecommunications
Of a kind used for telecommunications
Of a kind used for telecommunications
Of a kind used for telecommunications
Other
Other
Other
Data transmission cable capable of a bit rate transmission of 600|Mbit/s or more, with: -|a voltage of 1,25|V|(±|0,25|V) -|connectors fitted at one or both ends, at least one of which contains pins with a pitch of|1|mm, -|outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits
PVC isolated flexible eight wire cable with: -|a length of not more than 2100|mm -|an operating voltage of 5V or more, but not more than 35V -|a temperature resistance of not more than 80°C -|either an over-moulded 7|pin round 270° DIN male connector, a 6|pin A1101|male connector or a 8|pin A1001|male connector on one end and -|at least two stripped and tinned wires on the other end -|whether or not with mounted rubber pad with integrated strain relief
PET or PVC insulated flexible cable with or without connector with: -voltage of not more than 250 V, -a current of not more than 1 A, -a heat resistance of not more than 105 °C, -individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), -a distance between conductors of not more than 0,5 mm and -a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm
PET/PVC insulated flexible cable with: -|a voltage of not more than 60|V, -|a current of not more than 1|A, -|a heat resistance of not more than 105|°C, -|individual wires of a thickness of not more than 0,1|mm (± 0,01|mm) and a width of not more than 0,8|mm (± 0,03|mm), -|a distance between conductors of not more than 0,5|mm and -|a pitch (distance from centreline to centreline of conductors) of not more than 1,25|mm
PET/PVC insulated flexible cable with: -|a voltage of not more than 60|V, -|a current of not more than 1|A, -|a heat resistance of not more than 105|°C, -|individual wires of a thickness of not more than 0,1|mm (± 0,01|mm) and a width of not more than 0,8|mm (± 0,03|mm), -|a distance between conductors of not more than 0,5|mm and -|a pitch (distance from centreline to centreline of conductors) of not more than 1,25|mm
PVC isolated flexible cable with: -|a length of not more than 1800|mm -|an operating voltage of 5V or more, but not more than 35V -|a heat resistance of not more than 80°C -|an over-moulded 8|pin MiniFit male connector on one end -|either a 6|pin MiniFit socket or two| over-moulded AMP connectors on the other end -|a over-moulded resistor inside the connector and -|a moulded strain relief on the cable -|whether or not with a over-moulded diode inside a connector
PET insulated electric conductor with: -|10|or 80|individual wires, -|a length of 50|mm or more, but not more than 800|mm, -|connector(s) and/or plug(s) fitted at one or both ends, for use in the manufacture of products falling within headings 8521|and 8528
PVC isolated flexible six or eight wire cable with: -|a length of not more than 1300|mm -|an operating voltage of 5V or more, but not more than 35V -|a heat resistance of not more than 80°C -|either an over-moulded 8|pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end and -|either an over-moulded 8|pin MiniFit socket or an 8|pin MicroFit male connector on the other end
Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box
Wire harness or cable for steering system: - for an operating voltage of 12V, - with connectors on both sides, - whether or not with anchor clamps of plastic for mounting on a motorVehicle steering box
Wire harness of the steering system with an operating voltage of 12|V, equipped with connectors on both sides, having at least 3|plastic anchor clamps for mounting on a motor vehicle steering box
Specially designed connector for solar power system: -as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors or -as 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors, -with a current for the diodes of 3 A or more but not more of 50 A, -with a cable length of not more than 1 500 mm, -with a maximum rated voltage of 1 500 V
Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and/or audio systems to a USB connector and/or LCD monitor, for use in the manufacture of goods of Chapter 87
Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87
Four-core connecting cable containing two female connectors| for the transmission of| digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87
Wire harness for the transmission of signals and/or electrical power, -with a 26-PIN or 28-PIN wire to board connectors in crimping technology, -bound by rubber or vinyl or electrical tape or conduit or a weave of extruded string or a combination thereof, for connection of power supply with main printed (circuit) board assembly (PBA) and electrical components of refrigerator or washing machine
Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a plastic conduit, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87
Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87
Electric conductors: -|of a voltage of not more than 80|V, -|with a length of not more than 120|cm, -|fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors
12-wire connecting cable containing two connectors -|of a voltage of 5|V, -|with a length of not more than 300|mm for use in the manufacture of goods of Chapter 87
Other
Statistical classifications
Other electric conductors, for a voltage not exceeding 1,000 V
Other electric conductors, for a voltage not exceeding 1000 V
Export control
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .