Reception and transmission apparatus; for use with the apparatus of heading no. 8524 to 8528, excluding aerials and aerial reflectors8529.90
EU customs codes (CN)
Organic light-emitting diode "OLED" modules and OLED panels for television reception apparatus
Electronic assemblies suitable for use solely or principally with flat panel display modules, transmission and reception apparatus for radio-broadcasting or television, television cameras,digital cameras, video camera recorders, radar apparatus, radio navigational aid apparatus or radio remote control apparatus, monitors and projectors, n.e.s.
Parts suitable for use solely or principally with reception apparatus for radio-broadcasting or television, or with monitors or projectors, n.e.s. (excl. aerials and electronic assemblies)
Parts suitable for use solely or principally with flat panel display modules, transmission apparatus for radio-broadcasting or television, television cameras, digital cameras, video camera recorders, radar apparatus, radio navigational aid apparatus or remote control apparatus, n.e.s. (excl. electronic assemblies)
Turkey — national tariff (GTİP)
- - 8528.72 veya 8528.73 alt pozisyonlarındaki cihazlara ait organik LED modüller
- - - - 85.26 pozisyonunda yer alan cihazlara mahsus iki veya daha fazla aksam ve parçanın
- - - - Diğerleri
- - - - 85.27 ve 85.28 pozisyonlarındaki cihazlara ait olanlar
- - - - - 85.26 pozisyonunda yer alan cihazlara mahsus iki veya daha fazla aksam ve parçanın
- - - - - Diğerleri
TARIC sub-codes
Other
Other
Other
Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528|72|or 8528|73
Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528|72|or 8528|73
Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528|72|or 8528|73
Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528|72|or 8528|73
Of articles of subheadings 8524|11|00|and 8524|91|00
Of articles of subheadings 8524|11|00|and 8524|91|00
Other
Other
Other
Other
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|41|00, 8528|51|00|and 8528|61|00
Of digital cameras falling within subheadings 8525|81|00, 8525|82|00, 8525|83|00|and 8525|89|00; Of apparatus of subheadings 8525|60|00, 8528|42|00, 8528|52|10|and 8528|62|00
Of digital cameras falling within subheadings 8525|81|00, 8525|82|00, 8525|83|00|and 8525|89|00; Of apparatus of subheadings 8525|60|00, 8528|42|00, 8528|52|10|and 8528|62|00
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|41|00, 8528|51|00|and 8528|61|00
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|42|00, 8528|52|10|and 8528|62|00
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|42|00, 8528|52|10|and 8528|62|00
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|42|00, 8528|52|10|and 8528|62|00
Electronic assemblies
Other
Cabinets and cases
Other
Of wood
Of wood
Other
Other
Other
Other
Cabinets and cases
Cabinets and cases
Cabinets and cases
Of other materials
Of other materials
Electronic assemblies
Electronic assemblies
Electronic assemblies
Electronic assemblies
Electronic assemblies
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
Electronic assembly comprising at least -|a printed circuit -|processors for multi-media applications and video signal processing -|FPGA (Field Programmable Gate Array) -|Flash memory -|operating|memory -|HDMI, VGA, USB and RJ-45|interfaces -|sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
Electronic assembly comprising at least: - a printed circuit board with, - one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing, - operating memory, - with or without flash memory, - with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces, - with or without sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
Electronic assembly comprising at least -a printed circuit board with, -processors for multi-media applications and video signal processing, -FPGA (Field Programmable Gate Array), -Flash memory, -operating memory, -USB-interface, -with or without HDMI, VGA- and RJ-45 interfaces, -sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
Electronic assembly comprising at least: - a printed circuit board with, - one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing, - flash memory, - operating memory, - with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces, - sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
Electronic assembly comprising a printed circuit board with at least: - processors for multi-media applications and video signal processing, - FPGA (Field Programmable Gate Array), - flash memory, - operating memory, - with or without USB, HDMI, VGA- and RJ-45 interfaces, - sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing
Assembly consisting of at least: -|an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver
Assembly consisting of at least: -|an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver
Satellite radio receiver module: -with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm, -comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC, -being able to process radio frequency signals, -with a medium frequency unit, for use in the manufacture of products falling under heading 8527
Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of|products falling within heading 8527
Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of|products falling within heading 8527
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under headings|8521 and|8528
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528
Ambient light LED board to be incorporated in goods of heading 8528
Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of sattelite or terrestrial TV receivers for set-top boxes
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT|glass panel of a LCD module
Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules
Modules comprising at least semiconductor chips for: - the generation of driving signals for pixel addressing, or - driving addressing pixels
Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading|8527
Assembly consisting of at least: -|an audio frequency amplifier unit, |comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver |for use in the manufacture of consumer electronic products
Other
Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
Other
Other
Other
Other
Other
Other
Other
Other
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
For television cameras falling within subheadings 8525|81, 8525|82, 8525|83|and 8525|89|and apparatus of headings 8527|and 8528
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
For television cameras falling within subheadings 8525|81, 8525|82, 8525|83|and 8525|89|and apparatus of headings 8527|and 8528
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
Other
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|not combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters
LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|not combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
LCD modules, not combined with touch screen facilities, solely consisting of: -|one or more TFT glass or plastic cells, -|a die cast heat sink, -|a backlight unit, -|one printed circuit board with micro controller, and -|LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles
Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players
Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading|8528
LCD modules combined with touch screen facilities -|solely consisting of one or more TFT cells, -|with a diagonal measurement of the screen of 10,7|cm or more but not more than 36|cm, -|with or without LED backlight, -|with control electronics for pixel addressing only, -|without an EPROM memory (Erasable Programmable Read-only Memory), -|with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface used solely for installation in motor vehicles of Chapter 87
LCD modules with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 25,5|cm, -|a LED backlight, -|a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components, -|an 8|pin|plug for power supply and 4- pin LVDS interface, -|whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of chapter 87
LCD module with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 20,3|cm, -|or without a touch screen, -|an LED backlight, -|a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, -|a 12|pin|plug for power supply and CAN and LVDS interfaces, -|in a housing with monitor and other control functions, suitable for installation in motor vehicles of chapter 87
Fastening and covering ledges of aluminium alloy containing: -|silicon and magnesium, -|with a length of 300|mm or more but not more than 2|200|mm, specifically shaped for use in the manufacture of TV sets
LCD modules with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 25,5|cm, -|a LED backlight, -|a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2|(Automotive Pixel Link) driver module and other active and passive components, -|a 6|to 8|pin connector for power supply and a 2|to 4- pin connector for LVDS (Low-voltage differential signalling)/LIN signals or a APIX2|interface or a LVDS/LIN interface for signals and power supply -|whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of Chapter 87
Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors
Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors
Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets
Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527|or 8528
Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only
Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats
Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of|analogue or digital, monolithic integrated circuit|with pixels of| not more than 12|µm|!x!|12|µm in monochromic version with|microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 µm × 12 µm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 µm × 12 µm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
Aluminium die cast heat sink, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading|8527
AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
AC Socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC Socket with the PDP Power Supply Unit, whether or not equipped with a metal support, which joins the AC Socket to the PDP TV set
Colour LCD display panel for LCD monitors of heading 8528: • with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, • with backlight, micro-controller, • with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, • in a housing with or without a heat sink at the back of the housing, • without a signal-processing module, for use in the manufacture of vehicles of chapter 87
OLED modules, consisting of one or more TFT glass or plastic cells, -|a diagonal measurement of the screen of 121|cm or more, but not more than 224|cm, -|with a thickness of not more than 55mm -|containing organic material -|with control electronic for pixel addressing only, -|with V-by-One Interface and with or without a plug for power supply,| -|with or without back cover of a kind used in the manufacture of TV sets and monitors
LCD module, glass or plastic covered and optically bonded, with -a diagonal measurement of the screen of 12 cm or more but not more than 31 cm, -LED backlighting, -a printed circuit board with EEPROM (Electrically Erasable Programmable Read-Only Memory), microcontroller, timing controller and other active and passive components, -a plug for power supply and CAN (Controller Area Network) and LVDS (Low Voltage Differential Signalling) interfaces, -whether or not with electronic components to generate additional control indicators for vehicle information on the display, -with or without a touch screen, -without a signal processing module, -in a housing with additional LED indicators for warning lights, -with or without a gear shift indicator and a photo sensor, of a kind used as a driver information display in motor vehicles of Chapter 87
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT|glass panel of a LCD module
LCD display with: -a touch panel, -at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings, -a diagonal screen measurement of 15 cm or more but not more than 21 cm, -a backlight, -a LVDS (Low Voltage Differential Signalling) and a power supply connector, for use in the manufacture of motor vehicles of Chapter 87
OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors
OLED modules, consisting of - one or more TFT glass or plastic cells, containing organic material, - with or without combined touch screen facilities and - one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87
OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities|and one or more printed circuit boards with control electronics for pixel addressing, of a kind used in the manufacture of TV sets and monitors
LCD display with: - a touch panel, - at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings, - a diagonal screen measurement of 15 cm or more but not more than 21 cm, - a backlight, - a LVDS (Low Voltage Differential Signalling) and a power supply connector, - a viewing angle of 70 degree, or more, and - a luminance of 715 cd/m², or more, for use in the manufacture of motor vehicles of Chapter 87
Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players
LCD modules with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 25,5|cm, -|a LED backlight, -|a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2|(Automative Pixel Link) driver module and other active and passive components, -|6|to 8|pin plug for power supply and 2|to 4- pin LVDS (Low-voltage differential signalling) or APIX2|interface, -|whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of Chapter 87
LCD module -|with a diagonal measurement of the screen of 14,5|cm or more but not more than 38,5|cm, -|with or without a touch screen, -|with an LED backlight, -|with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, -|with a plug for power supply and CAN and LVDS interfaces, -|with or without electronic components for dynamic adjustments of colour, -|in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system, suitable for installation in motor vehicles of Chapter 87
OLED display consisting of: -|the organic layer with organic LEDs, -|two conductive layers on electron transfer and electron holes, -|layers of transistors (TFT) with| resolution of a 1920|x 1080 -|anode and cathode for power supply of organic diodes, -|RGB filter, -|glass or plastic protective layer, -|without the electronics for pixel addressing, for use in the manufacture of goods of headings 8528
Colour LCD display panel for LCD monitors of heading 8528: -|with a diagonal measurement of the screen of 14,48|cm or more but not more than 31,24|cm, -|with or without a touch screen, -|with backlight, micro-controller, -|with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface, -|in a housing with or without a heat sink at the back of the housing, -|without a signal-processing module, -|whether or not with haptic and acoustical feedback, for use in the manufacture of vehicles of Chapter 87
Rectangular fastening and covering frame: -|of an aluminium alloy containing silicon and magnesium, -|with a length of 500|mm or more but not more than 2|200|mm, -|with a width of 300|mm or more but not more than 1|500|mm, of a kind used for the production of TV sets
Rectangular fastening and covering frame: -|of an aluminium alloy containing silicon and magnesium, -|with a length of|900|mm or more but not more than 1|500|mm, -|with a width of 600|mm or more but not more than 950|mm, of a kind used for the production|of TV sets
CMOS-Image sensor -with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel), -to capture infra-red light reflected from objects, in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)
Printed circuit board with LED diodes: - whether or not equipped with prisms/lens, and - whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading|8528
OLED modules, consisting of one or more TFT glass or plastic cells, -a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm, -with a thickness of not more than 55mm, -containing organic material, -with control electronic for pixel addressing only, -with V-by-One Interface and with or without a plug for power supply, -with back cover, of a kind used in the manufacture of TV sets and monitors
Colour LCD module in a housing: -|with a diagonal screen measurement of 14.48|cm or more but not more than 26|cm, -|without touch screen, -|with a backlight and micro-controller, -|with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector, -|without a signal processing module, -|with control electronics for pixel addressing only, -|with a motorised mechanism for moving the display screen, for permanent installation in vehicles of Chapter 87
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Other
For apparatus of headings 8527|and 8528
For apparatus of headings 8527|and 8528
Other
Other
Other
Other
Other
Other
Other
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Organic light emitting diode modules and organic light emitting diode panels for the apparatus of subheadings 8528 72 or 8528 73
Other
Statistical classifications
Parts, n.e.s., suitable for use solely or principally with the machines falling within group 716
Poultry-keeping machinery; poultry incubators and brooders
Other agricultural, horticultural, forestry or bee-keeping machinery (including germination plant fitted with mechanical or thermal equipment)
Parts of the machinery and appliances of headings 721.95 and 721.96
Machinery for public works, building or the like, n.e.s.
Buckets, shovels, grabs and grips
Bulldozer or angledozer blades
Parts for boring or sinking machinery of heading 723.37 or 723.44
Other parts for the machinery of group 723 (excluding heading 723.48) and of subgroup 744.3
Sewing-machines of the household type
Other sewing-machines
Sewing-machine needles; furniture, bases and covers specially designed for sewing-machines; parts of the machines and furniture of subgroup 724.3
Parts and accessories of machines of subgroup 724.4 or heading 724.54 or of their auxiliary machinery
Auxiliary machinery for machines of headings 724.41, 724.42, 724.43, 724.51, 724.52 and 724.53
Parts and accessories of weaving machines (looms) of heading 724.51 or of their auxiliary machinery
Parts and accessories of machines of headings 724.52 and 724.53 or of their auxiliary machinery
Household or laundry-type washing-machines (including machines which both wash and dry), each of a dry linen capacity exceeding 10 kg.
Dry-cleaning machines
Drying machines, each of dry linen capacity exceeding 10 kg (excluding those of subgroups 741.8 and 743.5)
Machinery for washing (other than household or laundry-type machines), cleaning (other than dry-cleaning machines), wringing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing (other than machines for the finishing of felt), coating or impregnating textile yarns, fabrics or made-up textile articles; machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics
....for the household or laundry-type washing-machines of headings 724.71 and 775.11
....for the machines of headings 724.72, 724.73, 724.74 and 775.12
Cutting machines
Machines for making bags, sacks or envelopes
Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding.
Machines for moulding articles in paper pulp, paper or paperboard
Other machinery
Parts of the machines of subgroup 725.2
....reel-fed
....sheet-fed, office-type (sheet size not exceeding 22 x 36 cm)
Offset printing machinery, n.e.s.
Letterpress printing machinery (excluding flexographic printing)
Flexographic printing machinery
Gravure printing machinery
Other printing machinery, n.e.s.
....for the machines of subgroups 726.5 and 726.6
Machinery for the extraction or preparation of animal or fixed vegetable fats and oils.
Machinery, n.e.s., for the industrial preparation or manufacture of food or drink
Parts for the food-processing machinery of heading 727.22
Parts and accessories suitable for use solely or principally with the machine tools of subgroup 728.1
Machines and apparatus for the manufacture of boules and wafers, semiconductor devices or of electronic integrated circuits and flat panel displays
Machines and apparatus solely or principally of a kind used for the manufacture or repair of masks and reticles, assembling semiconductor devices or electronic integrated circuits and lifting, handling, loading and unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays
Parts and accessories
Machines for assembling electric or electronic lamps, tubes or valves or flash bulbs, in glass envelopes; machines for manufacturing or hot-working glass or glassware.
Machinery for working rubber or plastics or for the manufacture of products from these materials, n.e.s.
Machinery for preparing or making up tobacco, n.e.s.
Presses for the manufacture of particle board or fibre building board of wood or other ligneous material and other machinery for treating wood or cork, n.e.s.
Machinery for treating metal (including electric wire coil-winders), n.e.s.
Machines and mechanical appliances having individual functions, n.e.s.
Parts for the machines of heading 728.41
Parts for the machines of heading 728.42
Parts for the machines of heading 728.43
Parts, n.e.s., for the machines of headings 723.48, 727.21, 728.44, 728.46 and 728.49
Tool holders and self-opening die-heads
Work holders
Dividing heads and other special attachments for machine tools
....for machines of group 731
....for machines of group 733
Resistance-heated furnaces and ovens, electric
Induction or dielectric furnaces and ovens
Other electric furnaces and ovens
Other induction or dielectric heating equipment
Parts for the equipment of headings 741.31 through 741.34
Furnaces and ovens for the roasting, melting or other heat-treatment of ores, pyrites or of metals, non-electric.
Bakery ovens (including biscuit ovens), non-electric
Other non-electric furnaces and ovens (including incinerators)
Parts for the furnaces and ovens of headings 741.36 through 741.38
Refrigerating or freezing chests (other than household-type), cabinets, display counters, showcases and similar refrigerating or freezing furniture
Other refrigerating or freezing equipment; heat pumps
Parts of refrigerators, freezers and other refrigerating or freezing equipment (electric or other)
....window or wall-types, self-contained or 'split-system'
....other air-conditioning machines
Parts for the air-conditioning machines of subgroup 741.5
Distilling or rectifying plant
Heat-exchange units
Machinery for liquefying air or other gases
Instantaneous gas water-heaters
Other instantaneous or storage water-heaters, non-electric
Medical, surgical or laboratory sterilizers
Driers for agricultural products
Driers for wood, paper pulp, paper or paperboard
Driers, n.e.s.
Machinery for making hot drinks or for cooking or heating food
Other machinery, plant or equipment
Parts, n.e.s., for the machinery of headings 741.73 through 741.89
Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages, fitted or designed to be fitted with a measuring device.
Other pumps fitted or designed to be fitted with a measuring device
Fuel, lubricating or cooling medium pumps for internal combustion piston engines
Concrete pumps
Reciprocating positive displacement pumps, n.e.s.
Rotary positive displacement pumps, n.e.s.
Centrifugal pumps, n.e.s.
Pumps for liquids, n.e.s.
Liquid elevators
....of pumps
....of liquid elevators
Vacuum pumps
Hand- or foot-operated air pumps
Compressors of a kind used in refrigerating equipment
Air compressors mounted on a wheeled chassis for towing
Other
Table, floor, wall, window, ceiling or roof fans with self-contained electric motor of an output not exceeding 125 W.
Other fans
Hoods having a maximum horizontal side not exceeding 120 cm
Cream separators
Clothes driers
Other centrifuges
....for filtering or purifying water
....for filtering or purifying beverages other than water
Oil or petrol filters for internal combustion engines
Intake air filters for internal combustion engines
....for liquids, n.e.s.
....for gases, n.e.s.
Parts for the pumps, compressors, fans and hoods of subgroups 743.1 and 743.4
....of centrifuges (including centrifugal driers)
....of filtering or purifying machinery and apparatus
....of machinery of subgroups 744.2 and 744.4
....of machinery of headings 744.11, 744.12 and 744.13
....of lifts, skip hoists or escalators
....of other lifting, handling, loading or unloading machinery of subgroups 744.7 and 744.8
Dishwashing machines (other than household-type)
Machinery for cleaning or drying bottles or other containers
Other
Parts of the machinery of subgroup 745.2 and heading 775.3
Weighing machinery (excluding balances of a sensitivity of 5 cg or better, personal weighing-machines and household scales), including weight-operated counting and checking machines
Personal weighing-machines (including baby scales); household scales
Weighing-machine weights of all kinds; parts of the weighing machinery of subgroup 745.3
Fire extinguishers, whether or not charged
Spray-guns and similar appliances
Steam or sandblasting machines and similar jet-projecting machines
Agricultural or horticultural appliances for projecting, dispersing or spraying liquids or powders
Other appliances for projecting, dispersing or spraying liquids or powders
Parts of the appliances of subgroup 745.6
Automatic goods-vending machines (e.g., postage stamp, cigarette, food or beverage machines), including money-changing machines
Parts for the machines of heading 745.95
Machines which perform two or more of the functions of printing, copying or fascsimile transmission, capable of connecting to an automatic data processing machine or to a network
Other, capable of connecting to an automatic data processing machine or to a network
Other printers, copying and facsimile machines
Parts and accessories
Parts and accessories equally suitable for use with machines of two or more of the subgroups 751.1, 751.2, 751.9 and group 752
....for the machines of subgroup 751.1
....for the machines of subgroup 751.9
....for the electronic calculating machines of subgroup 751.2
....for the machines of group 752
Telephone sets, including telephones for cellular networks or for other wireless networks
Other apparatus for transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network)
Parts
Microphones and stands therefor
Loudspeakers, mounted in their enclosures
Loudspeakers, not mounted in their enclosures
Headphones, earphones and combined microphone/speaker sets
Audio-frequency electric amplifiers
Electric sound amplifier sets
....with the apparatus and equipment of subgroup 764.2
....with the apparatus and equipment of groups 761 and 762 and subgroups 764.3 and 764.8
....with the apparatus falling within group 763
Liquid dielectric transformers
Other electrical transformers
Static converters (e.g., rectifiers)
Ballasts for discharge lamps or tubes
Other inductors
Parts of the electric power machinery of group 771
Boards, panels, consoles, desks, cabinets and other bases for the goods of subgroup 772.6, not equipped with their apparatus
Other parts
Electrocardiographs
Other electrodiagnostic apparatus (including apparatus for functional exploratory examination or for checking physiological parameters).
Ultraviolet or infrared ray apparatus
Apparatus based on the use of X-rays, whether or not for medical, surgical, dental or veterinary uses (including radiography or radiotherapy apparatus)
Apparatus based on the use of alpha, beta or gamma radiations, whether or not for medical, surgical, dental or veterinary uses (including radiography or radiotherapy apparatus).
X-ray tubes
Other (including parts and accessories)
Household- or laundry-type washing-machines (including machines which both wash and dry), each of a dry linen capacity not exceeding 10 kg.
Clothes-drying machines, each of a dry linen capacity not exceeding 10 kg. (excluding those of heading 743.55)
Refrigerators, household-type (electric or other), whether or not containing a deep-freeze compartment
Deep-freezes, household-type (electric or other)
Dishwashing machines of the household type
Shavers
Hair clippers
Parts
….with self-contained electric motor
….other
….parts
Food grinders and mixers; fruit or vegetable juice extractors
Other
Parts
Electric instantaneous or storage water-heaters and immersion heaters
Electric space-heating apparatus and electric soil-heating apparatus
Electrothermic hairdressing or hand-drying apparatus
Electric smoothing-irons
Microwave ovens; other ovens; cookers, cooking plates, boiling rings, grillers and roasters
Electrothermic domestic appliances, n.e.s.
Electric heating resistors (other than of carbon)
Parts of the electrothermic appliances of subgroup 775.8
Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, n.e.s.
Electrical lighting or signalling equipment (excluding articles of subgroup 778.2), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles
Parts of the equipment of heading 778.34
Particle accelerators
Other
Parts
Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 791.91)
Parts of the equipment of heading 778.82
Electric sound or visual signalling apparatus (e.g., bells, sirens, indicator panels, burglar and fire-alarms), other than those of heading 778.34 or 778.82
Parts of the equipment of heading 778.84
Bumpers and parts thereof
Other parts and accessories of bodies (including cabs)
Brakes and servo-brakes and parts thereof
Gearboxes and parts thereof
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
Other parts and accessories
Parts and accessories of motorcycles (including mopeds)
Parts and accessories of invalid carriages
Parts and accessories of other vehicles of group 785
Trailers and semi-trailers of the caravan type, for housing or camping.
Self-loading or self-unloading trailers and semi-trailers for agricultural purposes
Tanker trailers and tanker semi-trailers
Other trailers and semi-trailers for the transport of goods
Trailers and semi-trailers, n.e.s.
Vehicles, not mechanically-propelled, n.e.s.
Parts of the trailers and semi-trailers of headings 786.1, 786.3 and 786.85 and subgroup 786.2
Parts of railway or tramway locomotives or rolling-stock
Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing
Propellers and rotors and parts thereof
Undercarriages and parts thereof
Other parts of aeroplanes or helicopters
Other parts of the goods of group 792
Binoculars
Other astronomical instruments
Parts and accessories (including mountings)
Microscopes (other than optical microscopes) and diffraction apparatus
Parts and accessories
Stereoscopic microscopes
Other microscopes for photomicrography, cinephotomicrography or microprojection
Microscopes, n.e.s.
Parts and accessories
Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of section 7, division 87, group 881 or 884 or subgroup 899.6
Lasers (other than laser diodes)
Other optical devices, appliances and instruments
Parts and accessories of the articles of subgroup 871.9
Dental drill engines, whether or not combined on a single base with other dental equipment
Other dental instruments and appliances
Syringes, needles, catheters, cannulae and the like
Ophthalmic instruments and appliances, n.e.s.
Other instruments and appliances
Mechanotherapy appliances; massage apparatus; psychological aptitude-testing apparatus
Ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus
Other breathing appliances and gas masks (excluding protective masks having neither mechanical parts nor replaceable filters).
Gas meters
Liquid meters
Electricity meters
Parts and accessories of gas, liquid or electricity meters
Revolution counters, production counters, taximeters, mileometers, pedometers and the like
Speed indicators and tachometers; stroboscopes
Parts and accessories of the articles of subgroup 873.2
Direction-finding compasses; other navigational instruments and appliances
Parts and accessories of navigational instruments and appliances
Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances (excluding compasses); rangefinders
Parts and accessories for the articles of heading 874.13
Drafting tables and machines, whether or not automatic, and other drawing, marking-out or mathematical calculating instruments
Instruments for measuring length, for use in the hand (e.g., measuring rods and tapes, micrometers, calipers), n.e.s.
Parts and accessories for the articles of headings 874.22 and 874.23
Measuring or checking instruments, appliances and machines, n.e.s.; profile projectors
Parts and accessories for the articles of heading 874.25
Instruments and apparatus for measuring or checking the flow or level of liquids
Instruments and apparatus for measuring or checking the pressure of liquids or gases.
Other instruments and apparatus
Parts and accessories
Gas or smoke analysis apparatus
Chromatographs and electrophoresis instruments
Spectrometers, spectrophotometers and spectrographs using optical radiations (UV, visible, IR)
Other instruments and apparatus using optical radiations (UV, visible, IR)
Instruments and apparatus for physical or chemical analysis, n.e.s.
Microtomes; parts and accessories of the articles of subgroup 874.4
Instruments, apparatus or models, designed for demonstrational purposes (e.g., for education or exhibition), unsuitable for other uses
Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (e.g., metals, wood, textiles, paper, plastics)
Parts and accessories for the machines and appliances of heading 874.53
Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers, psychrometers, recording or not, and any combination of these instruments
Parts and accessories for the instruments of heading 874.55
Thermostats
Pressure regulators and controllers (manostats)
Other regulating or controlling instruments and apparatus
Parts and accessories for automatic regulating or controlling instruments and apparatus
Instruments and apparatus for measuring or detecting ionizing radiations
Oscilloscopes and oscillographs
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power, without a recording device
Other instruments and apparatus, specially designed for telecommunications (e.g., crosstalk meters, gain-measuring instruments, distortion factor meters, psophometers)
Other instruments and apparatus for measuring or checking electrical quantities
Parts and accessories for the instruments and apparatus of subgroup 874.7
Parts and accessories for machines, appliances, instruments and apparatus, n.e.s.
Photographic (other than cinematographic) cameras
Photographic flashlight apparatus and flashbulbs
Parts and accessories for the photographic cameras of heading 881.11
Parts and accessories for photographic flashlight apparatus
Cinematographic cameras
Cinematographic projectors
Parts and accessories for the cinematographic cameras of heading 821.21.
Parts and accessories for cinematographic projectors
Microfilm, microfiche or other microform readers, whether or not capable of producing copies.
Image projectors, n.e.s.
Photographic (other than cinematographic) enlargers and reducers
Parts and accessories for the equipment of headings 881.31 through 881.33
Apparatus and equipment for photographic (including cinematographic) laboratories (including apparatus for the projection of circuit patterns on sensitized semiconductor materials), n.e.s.; negatoscopes; projection screens.
Parts and accessories for the apparatus and equipment of heading 881.35
Tricycles, scooters, pedal car and similar wheeled toys; dolls' carriages; dolls; other toys; reduced-size ('scale') models and similar recreational models, working or not; puzzles of all kinds
Video games of a kind used with a television receiver
Articles and accessories for billiards
Other games, operated by coins, banknotes, bank cards, tokens or by other means of payment, other than bowling alley equipment
Playing-cards
Articles for funfair, table and parlour games, n.e.s.
Other articles for Christmas festivities
Other entertainment articles
Ice-skates and roller-skates (including skating boots with skates attached)
Snow-skis and other snow-ski equipment
Water-skis, surfboards, sailboards and other water sport equipment
Golf equipment
Tennis, badminton or similar rackets, whether or not strung
Articles and equipment for general physical exercise, gymnastics or athletics.
Sports goods, n.e.s.
Hearing-aids (excluding parts and accessories)
Orthopaedic or fracture appliances
Artificial teeth and dental fittings
Other artificial parts of the body
Pacemakers for stimulating heart muscles (excluding parts and accessories)
Appliances, n.e.s., which are worn or carried or implanted in the body to compensate for a defect or a disability
Parts for the goods of subclasses 47211 to 47213, 47311 to 47315 and 48220
Export control
This commodity correlates with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .