Electric motors and generators; parts suitable for use solely or principally with the machines of heading no. 8501 or 85028503.00
EU customs codes (CN)
Non-magnetic retaining rings for electric motors and electric generating sets
Steel laminations and stator and rotor cores, whether or not stacked, for electric motors and electric generating sets
Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steel
Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excl. non-magnetic retaining rings, steel laminations and stator and rotor cores and of cast iron or cast steel)
Turkey — national tariff (GTİP)
- Manyetik olmayan tesbit bileziği
- Çelik laminasyonlar ve stator ve rotor çekirdekleri, istiflenmiş olsun veya olmasın
- - - Oyuncaklar için minyatür motor aksam ve parçaları
- - - - Stator ve rotor paketleri
- - - - Kollektörler
- - - - Kare ve dikdörtgenden başka şekilde kesilmiş manyetik saclar
- - - - Diğerleri
- - - Oyuncaklar için minyatür motor aksam ve parçaları
- - - - Stator ve rotor paketleri
- - - - Kollektörler
- - - - Kare ve dikdörtgenden başka şekilde kesilmiş manyetik saclar
- - - - Diğerleri
TARIC sub-codes
Parts suitable for use solely or principally with the machines of heading|8501|or 8502
Parts suitable for use solely or principally with the machines of heading|8501|or 8502
Parts suitable for use solely or principally with the machines of heading|8501|or 8502
Non-magnetic retaining rings
For use in certain types of aircraft
Other
Steel laminations and stator and rotor cores, whether or not stacked
Steel laminations and stator and rotor cores, whether or not stacked
For use in certain types of aircraft
Other
Other
Other
Other
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
Of cast iron or cast steel
For use in certain types of aircraft
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring
Other
Other
Other
For use in certain types of aircraft
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing
Other
Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm
Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements: - diameter of the rotor body of 15mm or more but not more than 37mm, - length of the rotor body of 12mm or more but not more than 36mm
Pressure casted inner housing of a cooling channel system for an electrical motor: -of EN AC-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), -with a tensile strength of 190 N/mm² or more, -with a height of 160 mm or more, but not more than 330 mm, -with a diameter of 240 mm or more, but not more than 368 mm, -with a weight of 3 kg or more, but not more than 5,84 kg
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
Pressure casted rotor cover of the cooling channel system in the electrical motor: -of EN AC-47100-F aluminum, -with a sealing cap of stainless steel, -shot-blasted and machined, -leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), -with a tensile strength of 240 N/mm² or more, -with a height of 50 mm or more, but not more than 55 mm, -with a diameter of 109 mm or more, but not more than 112 mm, -with a weight of 3,9 kg or more but not more than 4,2 kg
Pressure casted rotor cover of the cooling channel system in the electrical motor: - of EN AC-47100-F aluminum, - with a sealing cap of stainless steel, - shot-blasted and machined, - leakproof to the degree of 1ml per minute or less under 2,75 bar pressure, - with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 42mm or more, but not more than 64mm, - with a diameter of 88mm or more, but not more than 132mm, - with a weight of 0,3kg or more, but not more than 0,5kg
Stator for brushless motor, with: -an internal diameter of 206,6 mm (± 0,5) -an external diameter of 265,0 mm (± 0,2) and -a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
Pressure casted inner housing of a cooling channel system for an electrical motor: -of EN AC-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506) -with a tensile strength of 240 N/mm² or more, -with a height of 225 mm or more, but not more than 280 mm, -with a diameter of 300 mm or more, but not more than 310 mm, -with a weight of 3,8 kg or more, but not more than 4,9 kg
Pressure casted outer housing of an electrical motor: -of EN AC-47100 aluminum, -with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, -shot-blasted and machined, -a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506) -with a tensile strength of 240 N/mm² or more, -with a height of 245 mm or more, but not more than 360 mm, -with a width of 360 mm or more, but not more than 525 mm, -with a length of 345 mm or more, but not more than 450 mm, -with a weight of 6,4 kg or more, but not more than 8,3 kg
Pressure casted outer housing of an electrical motor: - of EN AC-47100 aluminum, - with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, - shot-blasted and machined, - with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, - with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), - with a tensile strength of 190 N/mm² or more, - with a height of 195mm or more, but not more than 430mm, - with a width of 290mm or more, but not more than 625mm, - with a length of 270mm or more, but not more than 535mm, - with a weight of 5,2kg or more, but not more than 12,5kg
Pressure die-cast electric motor stator housing: -of EN AC-46000 aluminium, -shot-blasted and machined, -with a height of 70 mm or more but not more than 76 mm, -with a width of 155 mm or more but not more than 162 mm, -with a weight of 330 g or more but not more than 360 g
Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm -whether or not incorporated in a housing
Other
Other
Other
Other
Other
For use in certain types of aircraft
Other
Stamped collector of an electric motor, having an external diameter of not more than 16|mm
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring
Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm
Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm
Rotor for brushless motor of electrical power steering with a roundness tolerance of 50|μm
Transmitter resolver for brushless motors of electrical power steering
Transmitter resolver for brushless motors of electrical power steering
Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with: -|diameter of the rotor body of 17|mm or more but not more than 37|mm, -|length of the rotor body of 12|mm or more but not more than 36|mm, -|shaft length of 52|mm or more but not more than 82|mm
Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501
Fuel cell membrane, in rolls or sheets, with a width of not more than 150|cm, of a kind used for manufacture of fuel cells in heading 8501
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements
Stator for brushless motor, with: -|an internal diameter of 206,6|mm (± 0,5) -|an external diameter of 265,0|mm (± 0,2) and -|a width of 41,00|mm (± 0,3) of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
Pressure casted rotor cover of the cooling channel system in the electrical motor: -of EN AC-47100-F aluminum, -with a sealing cap of stainless steel, -shot-blasted and machined, -leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), -with a tensile strength of 240 N/mm² or more, -with a height of 50 mm or more, but not more than 55 mm, -with a diameter of 109 mm or more, but not more than 112 mm, -with a weight of 3,9 kg or more but not more than 4,2 kg
Stator for brushless motor, with: -an internal diameter of 206,6 mm (± 0,5) -an external diameter of 265,0 mm (± 0,2) and -a width of 37,2 mm or more but not more than 47,8 mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
Stator for brushless motor, with: -|an internal diameter of 206,6|mm (± 0,5) -|an external diameter of 265,0|mm (± 0,2) and -|a width of 37,2|mm or more but not more than 47,8|mm of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
Pressure casted inner housing of a cooling channel system for an electrical motor: -of EN AC-47100 aluminum, -shot-blasted and machined, -leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506) -with a tensile strength of 240 N/mm² or more, -with a height of 225 mm or more, but not more than 280 mm, -with a diameter of 300 mm or more, but not more than 310 mm, -with a weight of 3,8 kg or more, but not more than 4,9 kg
Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)
Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5|mm (± 0,25|mm)
Pressure casted outer housing of an electrical motor: -of EN AC-47100 aluminum, -with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, -shot-blasted and machined, -a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, -with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506) -with a tensile strength of 240 N/mm² or more, -with a height of 245 mm or more, but not more than 360 mm, -with a width of 360 mm or more, but not more than 525 mm, -with a length of 345 mm or more, but not more than 450 mm, -with a weight of 6,4 kg or more, but not more than 8,3 kg
Rotor body of stacked electrical sheet having: -a diameter of 18 mm or more but not more than 35 mm, and -a length of 20 mm or more but not more than 65 mm
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm
Stator body of stacked electrical sheet having: -an inner diameter of 18 mm or more, but not more than 35 mm, -an outer diameter of 35 mm or more, but not more than 65 mm, and -a length of 20 mm or more, but not more than 65 mm -whether or not incorporated in a housing
Steel motor housing having: -an inner diameter of 35 mm or more but not more than 65 mm, -an outer diameter of 35 mm or more but not more than 70 mm, and -a length of 35 mm or more but not more than 150 mm
Other
Statistical classifications
Parts, n.e.s., suitable for use solely or principally with the machines falling within group 716
Parts of electric motors, generators and the like
Export control
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .