Taps, cocks, valves and similar appliances; parts thereof8481.90
EU customs codes (CN)
Parts of valves and similar articles for pipes, boiler shells, tanks, vats or the like, n.e.s.
Turkey — national tariff (GTİP)
- - Metal dökümden olanlar
- - Diğerleri
TARIC sub-codes
Parts
For use in certain types of aircraft
Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements
Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Valve armature: -|for the opening and closing of the flow of fuel, -|consisting of a shaft and a blade, -|with at least 3 but not more than 8 holes on the blade, -|made of metal and/or metal alloy(s)
Valve armature: -|for the opening and closing of the flow of fuel, -|consisting of a shaft and a blade, -|with 8|holes on the blade, -|made of metal and/or metal alloy(s)
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute
Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
Other
Statistical classifications
Parts for the appliances of group 747
Parts for the goods of subclass 43240
Export control
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .