Machines and mechanical appliances; having individual functions, n.e.c. or included in this chapter8479.89

Other

Other

Other

Mobile hydraulic-powered mine roof supports

Central greasing systems

Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

Other

Other

Other

The following goods, for use in civil aircraft :!1!Hydropneumatic batteries;!1!Mechanical actuators for thrust reversers;!1!Toilet units specially designed;!1!Air humidifiers and dehumidifiers;!1!Servo-mechanisms, non-electric;!1!Non-electric starter motors;!1!Pneumatic starters for turbo-jets, turbopropellers and other gas turbines;!1!Windscreen wipers, non-electric;!1!Propeller regulators, non-electric!1!

Bioreactor for biopharmaceutical cell culture -|having interior surfaces of type 316L austenitic stainless steel -|with a process capacity of 50|litres, 500|litres, 3,000|litres, 5,000|litres, 10,000|litres or 15,000|litres -|whether or not combined with a "clean-in-process" system and/or a dedicated paired media hold vessel

Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies

Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: -electronic brake assistants, -hydraulic unit driven by brushless electric motor, -brake fluid reservoir, for use in the manufacture of plug-in hybrid passenger cars

Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: -electronic brake assistants, -hydraulic unit driven by brushless electric motor, -brake fluid reservoir, for use in the manufacture of hybrid passenger cars

Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges

Pre-assembled process module unit of an ethane cracker unit, containing: -various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, -a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream, -a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), -associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and -a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers

Mechanical unit ensuring the movement of the camshaft with: -|8|oil chambers, -|a phasing range of at least 38°, but not more than 62°, -|a steel and/or steel alloy sprocket, -|a steel and/or steel alloy rotor

Mechanical unit ensuring the movement of the camshaft with: - 6 or 8 oil chambers, - a phasing range of at least 18° but not more than 62°, - a steel and/or steel alloy sprocket, - a steel and/or steel alloy and/or aluminium alloy rotor

Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles

Isobaric pressure exchanger with a flow rate of not more than 50|m$3/hr, whether or not with a booster pump

Pre-assembled process module unit of an ethane cracker unit, containing: -a system for filtering and cooling of dried cracked gas, -a deethanizer distillation column and associated equipment for C2-/C3+ separation, -an acetylene hydrogenation system to remove acetylene within a C2 stream, -a fuel gas drum that stores fuel gas for cracker furnaces, and  -a system to regenerate dryers in a cracker installation

High pressure fuel rail of galvanized ferrite-pearlite steel with: -at least one pressure sensor and one valve, -a length of 314 mm or more but not more than 322 mm, -an operating pressure not more than 225 MPa, -an inlet temperature not more than 95°C, -ambient temperature of -45°C or more but not more than 145°C, for use in the manufacture of compression ignition engines of motor vehicles

Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line

Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode

Bioreactor for biopharmaceutical cell culture - having interior surfaces of austenitic stainless steel, and - with a process capacity up to 15 000 litres, - whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel

Bioreactor for biopharmaceutical cell culture (having interior surfaces of type 316L austenitic stainless steel) with a process capacity of 50|litres, 500|litres, 3|000|litres or 10|000|litres, whether or not combined with a "clean-in-process" system

Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line

Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a|two part cure epoxy

Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy

Equipment for use in the manufacture of biopharmaceutical products comprising any of the following whether or not with associated vessels or tanks: -|Ultrafiltration-diafiltration unit; -|Automated control, testing and monitoring equipment for Clean in Process (CIP) and Sterilise in Place (SIP) activities; -|Process vessels and tanks

Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries

High Pressure Hard Materials Compression Press ("Link Press"): -|with a 16|000|tonne pressure rating, -|with a 1|100mm diameter Bolster (± 1mm), -|with a 1|400mm main cylinder (± 1mm), -|with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system, -|with a double arm manipulator arrangement and connections for piping and electrical systems, -|with a total weight 310|tonnes (± 10|tonnes), and -|creating 30|000|atmospheres at 1|500|degrees centigrade using Low Frequency Alternating Current (16|000|amps)

Other