Turbines; parts of gas turbines (excluding turbo-jets and turbo-propellers)8411.99
EU customs codes (CN)
Parts of gas turbines, n.e.s.
Turkey — national tariff (GTİP)
- - - Sivil hava taşıtlarında kullanılan gaz türbinlerine ait olanlar
- - - Diğerleri
TARIC sub-codes
Other
Other
Other
Of gas turbines, for use in civil aircraft
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: -|of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686, -|with a heat-resistance of not more than 1|100|°C, -|with a diameter of 28|mm or more, but not more than 180|mm, -|with a height of 20|mm or more, but not more than 150|mm
Other
Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm
Turbine housing of turbochargers with: -|a heat-resistance of not more than 1|050|°C, and -|a hole to insert a turbine wheel, whereby|the hole has a diameter of 28|mm or more, but not more than 181|mm
Turbine housing of turbochargers with: -|a heat-resistance of not more than 1|050|°C, and -|a hole to insert a turbine wheel, whereby|the hole has a diameter of 28|mm or more, but not more than 130|mm
Other
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: -|of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, -|with a heat-resistance of not more than 1|100|°C; -|with a diameter of 30|mm or more, but not more than 80|mm; -|with a height of 30|mm or more, but not more than 50|mm
Spiral-shaped gas turbine turbocharger component: -|of a stainless alloy, -|with a heat-resistance of not more than 1|050|°C, -|with a diameter of 100|mm or more, but not more than 200|mm, -|with a height of 100|mm or more, but not more than 150|mm, -|whether or not with an engine exhaust manifold
Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive - made of nickel-based superalloys, - for an operating temperature of more than 600 K but not more than 1600 K, - with a length of not more than 500 mm, - with a width of not more than 900 mm, - with a height of not more than 1300 mm
Other
Actuator for a single-stage turbocharger: -|with a built-in conducting horn and connecting sleeve, -|of a stainless steel alloy, -|whether or not with conducting horns having an operating distance of 20|mm or more but not more than 40|mm, -|with a length of not more than 350|mm, -|with a diameter of not more than 75|mm, -|with a height of not more than 110|mm
Actuator for a single-stage turbocharger: -|with a built-in conducting horn and|connecting sleeve, -|of a stainless steel alloy, -|with conducting horns having an operating distance of 20|mm, -|with a length of not more than 350|mm, -|with a diameter of not more than 75|mm, -|with a height of not more than 50|mm
Other
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: -|of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, -|with a heat-resistance of not more than 1|100|°C; -|with a diameter of 30|mm or more, but not more than 100|mm; -|with a height of 20|mm or more, but not more than 70|mm
Spiral-shaped gas turbine turbocharger component: -|with a heat-resistance of not more than 1|050|°C, and -|with a turbine wheel hole diameter of 30|mm or more, but not more than 110|mm
Spiral-shaped gas turbine turbocharger component: -|with a heat-resistance of not more than 1|050|°C, -|with a turbine wheel hole diameter of 30|mm or more, but not more than 110|mm, -|whether or not with an engine exhaust manifold
Actuator for a single-stage turbocharger: -|whether or not with conducting horns and connecting sleeves, having an operating distance of 20|mm or more but not more than 40|mm, -|with a length of not more than 350|mm, -|with a diameter of not more than 75|mm, -|with a height of not more than 110|mm
Other
Statistical classifications
Parts for the gas turbines of heading 714.89
Parts for the goods of subclass 43143
Export control
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .