Plastics; other articles n.e.c. in chapter 393926.90
EU customs codes (CN)
Perforated buckets and similar articles used to filter water at the entrance to drains, of plastics
Protective face shields/visors of plastics
Articles of plastics and articles of other materials of heading 3901 to 3914, n.e.s.
Turkey — national tariff (GTİP)
- - Drenajların girişinde suyun filtre edilmesinde kullanılan delikli
- - Koruyucu yüz siperliği
- - - Korseler,giyim eşyası veya aksesuarı için balenler ve benzerleri
- - - Yelpazeler,sapları ve saplarının aksamı
- - - - İdrar ve kolostomi torbaları
- - - - İlaç ölçü kaşıkları
- - - - Poliüretandan prezervatifler
- - - - Kelepçeler
- - - - Fare altlığı (Mouse pad)
- - - - Emzikler
- - - - Diş kaşıyıcı
- - - - Diğerleri
TARIC sub-codes
Other
Other
Other
Perforated buckets and similar articles used to filter water at the entrance to drains
Perforated buckets and similar articles used to filter water at the entrance to drains
Protective face shields/visors
Made from sheet
Other
Other
For technical uses, for use in civil aircraft
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material
Other
Silicone shell for breast implant
Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: -|not more than 75|µm of polyethylene, -|not more than 50|µm of polyamide, -|not more than 15|µm of polyethylene terephthalate and -|not more than 9|µm of aluminium with a tensile strength of more than 70|N/15|mm and oxygen transmission rate of less than 0,1|cm$3/m$2/24|hrs at 0,1|MPa
Other
Other
Other
Other
For technical uses, for use in civil aircraft
Microspheres of a polymer of divinylbenzene, of a diameter of 4,5|µm or more but not more than 80|µm
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material
Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with: -a density of 20 kg/m³ or more, but not more than 40 kg/m³, -a tensile strength of not less than 170 kPa, -water absorption coefficient of not greater than 1 %, -a length of 5 mm or more but not more than 300 mm, -a height of 10 mm or more but not more than 400 mm, -a depth of 5 mm or more but not more than 250 mm
Plastic cover with clips|for the exterior rear-view mirror of motor vehicles
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|µm or more but not more than 4,6|µm
Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle|and the base of a rear-view mirror
Parts of car radio and car air-conditioner front panels -|of acrylonitrile-butadiene-styrene with or without polycarbonate, -|coated with a copper, a nickel and a chrome layers, -|with a total thickness of coating of 5,54|μm or more but not more than 49,6|μm
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene for use in the manufacture of remote controls
Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls
Electroplated interior or exterior decorative parts consisting of: -|a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, -|layers of copper, nickel and chromium for use in the manufacturing of parts for motor vehicles of heading 8701|to 8705
Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint
Silicone shell for breast implant
Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm
Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705
Knob of car radio front panel, made of Bisphenol A-based polycarbonate
Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600|µm or more but not more than 1|200|µm and of a weight of 21|g/m$2|or more but not more than 42|g/m$2
Plastic ferrules and/or plugs: -supported with or without a stainless steel ring, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: -outer diameter of 0,33 mm or more but not more than 3,3 mm, -suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, -suitable for all solutions used in chromatography, for use in the production of chromatographic systems
Sheath contraceptives of polyurethane
Die-cast decoration element made of polycarbonate resin, coated with -|a silver-colour acrylic paint, and -|a transparent scratch-resistant paint of a kind used in the manufacture of car radio front panels
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of headings|8533, 8535, 8536, 8541, 8542|or 8548
Silicone decoupling ring, with an inner diameter of 15,4|mm (+0,0|mm/-0,1|mm), of a kind used in car parking aid sensor systems
Silicone decoupling ring with an inner diameter of 14,7mm or more but no more than 16,0mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems
Silicone decoupling ring, with an inner diameter of 15,4|mm (+ 0,0|mm/- 0,1|mm), in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems
Parts of car radio front panels -|of acrylonitrile-butadiene-styrene with or without polycarbonate, -|coated with a copper, a nickel and a chrome layers, -|with a total thickness of coating of 5,54|µm or more but not more than 22,3|µm
Other
Statistical classifications
Other articles
Articles of plastics n.e.c.
Export control
This commodity correlates with EU dual-use export controls.
HS editions
The Harmonized System is revised about every five years; this subheading is present in the editions below.
In the Harmonized System since HS .