Plastics; plates, sheets, film, foil and strip, of plastics n.e.c. in heading no. 3921, cellular3921.19

Of other plastics

Of other plastics

For use in certain types of aircraft

Blocks with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers

Other

Multilayer film consisting|of: -|30|% or more but not more than 60|% of a microporous polypropylene layer (CAS|RN|9003|07-0), -|20|% or more but not more than 40|% of a microporous polyethylene layer (CAS|RN|9002-88-4), and -|20|% or more but not more than 40|% of a boehmite layer/coating (CAS|RN|1318-23-6), for use in the manufacture of lithium-ion batteries

Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: -|a width of 98|mm or more but not more than170|mm, -|a thickness of 15|µm or more but not more than 36|µm, of a kind used for the manufacture of alkaline battery separators

Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 50 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm -laminated or not with a Polypropylene non-woven mat of 50 to 200 µm thickness -coated or not with surfactant -coated or not on 1 or 2 sides with a ceramic layer of min 1 µm thickness or more, but not more than 5 µm -coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 µm thickness or more, but not more than 5 µm

Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with -|a total thickness of more than 0,05|mm but not more than 0,20|mm, -|a water entry pressure between 5|and 200|kPa according to|ISO 811, and -|an air permeability of 0,08|cm$3/cm$2/s or more according to ISO 5636-5

Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application

Multi-porous multilayer separator foil with: -|one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, -|a width of 65|mm or more but not more than 170|mm, -|a total thickness of 0,01|mm or more but not more than 0,03|mm, -|a porosity of 0,25|or more but not more than 0,65

Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,

Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: -|a width of 1|600|mm or more but not more than 1|730|mm, and -|a membrane thickness of|15|μm or more, but not more than 50|μm for use in the manufacture of a bi-component ePTFE membrane

Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with -|zero transversal production direction (TD)|shrinkage, -|a total thickness of 10|µm or more but not more than 50|µm, -|a width of 15|mm or more but not more than 900|mm, -|a length of more than 200|m but not more than 3000|m, and -|an average pore size between 0,02|µm and 0,1|µm

Microporous polypropylene film of a thickness of not more than 100|µm

Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment

Film of polyethersulfone, of a thickness of not more than 200|µm

Cellular film, consisting of a layer of polyethylene of a thickness of 90|µm or more but not more than 140|µm and a layer of regenerated cellulose of a thickness of 10|µm or more but not more than 40|µm

Other